How To Replace Window Screens Like a Pro

Screens get damaged and need to be replaced occasionally. If your window screens are looking a little worse for wear, it might be time to replace them.

But don’t fret – with a little bit of know-how, you can replace your window screens like a pro in no time. Luckily for your, you can learn how to replace window screens with a few tips from us.

How to Replace Window Screens by Yourself

Replacing window screens might seem tricky, but if you know the basics, then you’ll be able to handle it. Here is a window screen replacement guide and the steps on how to do it.

Assess the Damage

The first thing you need to do during window screen replacement assessing the damage. Is the screen completely shredded? Does it have any holes? Is the frame bent? You need to know the extent of the damage in order to properly fix it.

If the damage is minor, you can either hire someone who knows how to fix vinyl windows or patch the holes with new screen material. If the damage is more significant, you may need to consider replacing the entire screen by first removing the old one.

Removing the Old Screen

Removing the old screen from your window is the first step in window screen replacement. You will need to remove the stops from the inside of the window frame and then pull the old screen out from there.

If the old screen is damaged, you can cut it away from the frame with a utility knife. Once the old screen is removed, you are ready to install the new screen.

Measuring and Cutting the New Screen to Size

If you’re looking to replace your window screens like a pro, then you’ll need to measure for window screens. you’ll need to measure the height, width, and thickness of the screens and the frame. Once you have those, you can order your new screens. 

Next, cut the new screen to size. Make sure to leave enough excess so that you can secure it in place. The best way to cut the screen is to use a utility knife. Now you’re ready to attach the new screen.

Attaching the New Screen

To attach the new screen, put the newly ordered and cut screen in the frame. Your best bet is to use a flathead screwdriver to push in the new screen retaining spline. If you don’t have a flathead screwdriver yet, then now is the time to either buy or borrow one.

Start at one end, and then work your way around until the spline is fully in place.

Finishing Touches to Your New Window Screen

Trim any excess screen material from around the edges of the frame. Clean up any dirt and any other things that may have gotten onto the screen to make sure that it’s both new and clean.

Finally, time to admire your handiwork, and keep these tips in mind for the next time you’ll need to replace your screen on your own. 

Now You Can Do it Yourself

Assuming you have the right tools, replacing a window screen is not terribly difficult. In fact, it’s a relatively easy process that most people can complete in less than an hour.

So if you’re in need of a new screen or two, don’t be afraid to tackle the job yourself. Just follow the steps on how to replace window screens outlined in this article, and you’ll be cruising through the replacement in no time.

For more on this topic, please check out our blog!


Related Posts

Leave a Reply